Limited Liability Company “Arkada-MB”Address: 35, Krasninskoe shosse, Smolensk, 214030, Russia
Phone/fax: +7 (4812) 65-26-99, 66-07-61.
INN: 6730050654, KPP: 673001001, Acc: 40702810628000000421 in FKB UNIASTRUM BANK in Smolensk, Correspondent account: 30101810400000000850, Bank Identity Code: 046614850, OKPO: 70841391, OKONH: 14230
Transverse Cutting Lines
Automatic lines of transverse cutting of rolled metal, made by the company «Arkada-MB», are effective and hi-tech kinds of equipment for cutting metal to sheets. This technology makes special demands to the equipment. «Arkada-MB» lines are perfect for those, who wants to have qualitative production at the modern equipment with the application of high-precision linear feeding machines. These lines are made with a wide range of thickness characteristics (from 0,25 to 6 mm.), when the width of the initial billet is from 600 to 2000 mm.
This equipment works with various metal such as cold-rolled steel, galvanized steel, metals paint-and-lacquer and polymeric coating, aluminum, etc. The thickness of a processed material reaches 6 mm. Thus cutting speed, depending on a line complete set, can reach 60 m/minutes. Weight of the initial coiled material is also defined by requirements of the buyer. Load-lifting mechanisms, as well as unwinding mechanisms, work in a range from 5 to 28 t.
Management of lines is carried out by modern electronic systems of various updating which provide high precision of metal sheet cutting and metal flattening. Having studied your requirements, the experts of the company «Arkada-MB» will offer the optimum way which will allow to reach a demanded parity of the price, productivity and quality of the product.
Distinctive qualities:
- Production quality
- High speed and accuracy of cutting
- Possibility of fast transition to another cutting ticket
- Ample opportunities for rigging of a line with components from foreign manufacturers, e.g. the executive units, component parts and flattening machines
- Modern electronic control
- Automatic diagnostics of malfunctions
- Conformity with certification of ISO:9000
Technical information:
Type equipment kind of the line for cutting of roller metal to sheets:
| Bearbeitetes Material | Coiled cold-rolled steel by State standard 19904, State Standard 14918 with galvanized and paint-and-lacquer coating |
| Tensile strength, MPa | to 490 |
| Thickness, mm | 0,3..2,0 |
| Width, mm | 600..1250 |
| Internal diameter of rolls, mm | 500, 600 |
| Outer diameter of rolls, mm | 650..1500 |
| Maximum weight of rolls, ton | 10 |
Characteristics of products:
| The minimum length of a metal sheet after transverse cutting, mm | 400 |
| The maximum length of a metal sheet after transverse cutting, mm | 6000 |
| The maximum height of a metal sheet pack, mm | 500 |
| The maximum weight of a metal sheet pack, ton | 5 |
| Line operating mode | Automatic |
| Mode of loading of rolls | Semiautomatic |
| Mode of a tape lace-up from a roll | Semiautomatic |
| Diameter of the uncoiler, mm: | |
| — with changeable tooling | 600 (560..620) |
| — without tooling | 500 (460..520) |
Accuracy of transverse cutting |
by State Standard 19904 (for the raised accuracy) |
| Quality of metal sheet flattening | by State Standard 19904 (for high planeness) |
| Camber of metal sheets | by State Standard 19904-90 |
| Multiplicity of sheet transverse cutting, mm | 5 |
| Line speed: | |
| — When the length of sheet is 6000 mm, running m/min | to 50 |
| — When the length of sheet is 4000 mm, running m/min | to 40 |
| — When the length of sheet is 3000 mm, running m/min | to 35 |
| — When the length of sheet is 2000 mm, running m/min | to 25 |
| — When the length of sheet is 1000 mm, running m/min | to 15 |
| — When the length of sheet is 400 mm, running m/min | to 5 |
| Line dimensions, as a guide, mm | |
| — length | 20000 |
| — width | 8500 |
| — height | 2500 |
Line weight, as a guide, ton |
35 |
| Rated capacity, as a guide, kilowatt | 100 |
| Nature of the current | Alternative |
| Voltage, Volt | 380/220 |