Limited Liability Company “Arkada-MB”Address: 35, Krasninskoe shosse, Smolensk, 214030, Russia
Phone/fax: +7 (4812) 65-26-99, 66-07-61.
INN: 6730050654, KPP: 673001001, Acc: 40702810628000000421 in FKB UNIASTRUM BANK in Smolensk, Correspondent account: 30101810400000000850, Bank Identity Code: 046614850, OKPO: 70841391, OKONH: 14230
News
Arkada-MB: Started the assembly of LA 219: an automatic line of transverse cutting of rolled metal with a thickness of 0.4 - 1.2 mm, width of 500-1250 mm
А Arkada-MB: Started the assembly of an automatic line of cross-section cutting of rolled metal with a thickness of 0.4-1.2 mm, width of 500-1250 mm
Slitting line for rolled steel products. Forging and pressing equipment.
LA 219: Automatic line of transverse cutting of rolled metal with a thickness of 0.4 - 1.2 mm, width of 500-1250 mm
Composition of transverse cutting line of rolled metal with a thickness of 0.4 - 1.2 mm, width of 500-1250 mm:
1. Uncoiler;
2. Loading device (trolley with lifting prism);
3. Base device;
4. Straightening-feeding machine
5. Device for applying a protective film;
6. Transverse cutting shears;
7. Transporter;
8. Receiving table;
9. Hydraulic device;
10. Pneumatic device;
11. Electric device
Arkada-MB LLC designs, manufactures and sells roll forming equipment, cutting and slitting lines, stamping and perforating machines, multi-disk metal shears, straightening machines, cut-off stamps, punching units. Arkada-MB LLC performs installation and commissioning works, provides warranty and service maintenance of machine tools
For design, manufacture of the equipment required by the customer, please contact the commercial service of «Arkada-MB»:
Tel./FAX: +7(4812) 63-80-02
e-mail: okr@arkada-rus.com
You can fill in the equipment request form